Reservoir Kit for Brembo Master Cylinders
CNC Reservoir
- ■ High quality, high precision reservoir body is“made in Japan”!! Precisely machined from aluminum alloy in Japan!
- ■ Compatible with dimensions of Brembo reservoirs! If you use a compatible Brembo reservoir, it can be easily replaced!
- ■ Equipped with an oil level check window!
Special resin inspection window with high chemical resistance and weather resistance!
Technical spec
- Oil capacity: 30A→30cc 15A→15cc
- Material: aluminum alloy
- Surface treatment: anodized
Spare parts
Oil level check window ［KOK-20402］)
Joint nipple For Brembo (φ6): [KOK-20403］
Joint nipple For NISSIN (φ7.3): [KOK-20404］
※The photo is KOK-20404.
KOHKEN CNC Fluid Oil Reservoir You can order parts in your favorite colors!!
Please refer to the color code table here.
[Example] When the color is red at 30A → KOK-2040-RD
Mechanical Switch Kits for Brembo
- ■ The switches are waterproof and made in Japan.
- ■ High durability is achieved by using stainless steel and aluminum alloy for all materials!
- ■ Easy installation with bolt-on. No processing is needed!
- ■ Kits for clutch master cylinders are adjusted by lever and no need to be adjusted by switch.
- ■ Kits for Radial master cylinders are compatible with straight and folding levers of all sizes and ratios!
For radial brake master cylinders KOK-2000
For radial clutch master cylinders KOK-2001
For RCS clutch master cylinders KOK-2002
Reservoir Bracket for Brembo
- ■ High quality reservoir kit focusing on materials and appearance!
- ■ Includes hose, clamp and short parts! *not including Brembo oil tank
- ■ Compatible with Brembo Corsa Corta, RCS and Radial master cylinders!
- ■ For both naked bikes and cowling bikes are available to achieve perfect fit to your bike!
- ■ Black finish and polished finish color selections are available for coordination with your bike!
for BRAKE (double discs) / naked bikes
Polished [KOK-2090PL]
Black [KOK-2090BK]
Aero levers
▲ Three lengths are available.
Top: Short for one or two fingers
Center: Middle for two or three fingers
Bottom: : Standard having the same length as Brembo standard
Top: Short for one or two fingers
Center: Middle for two or three fingers
Bottom: : Standard having the same length as Brembo standard
▲ Low drag design
Aero holes optimized for each size
Left: Short, Center: Middle, Right: Standard
Aero holes optimized for each size
Left: Short, Center: Middle, Right: Standard
▲ The lever back has a slim design.
Depending on the vehicle, the Brembo lever may interfere with the switch box and the lever can not be fully gripped. However,aero levers can solve this problem.
Depending on the vehicle, the Brembo lever may interfere with the switch box and the lever can not be fully gripped. However,aero levers can solve this problem.
▲ The lever front is the same design as Brembo's.
Inheriting Brembo' s excellent grip comfort.
Inheriting Brembo' s excellent grip comfort.
■Machined from alminum alloy!
■Black anodized finish!
※This photo shows (from the left) short, middle, and standard levers for RCS Corsa Corta brake master cylinders/Avanza mechanical clutch holders.
For RCS CorsaCorta brake master/Avanza mechanical clutch holder
■Standard KOK-2074L■Middle KOK-2074M
■Short KOK-2074S
For RCS master brake and clutch cylinders/Basic and Racing mechanical clutch holders
■Standard KOK-2037L■Middle KOK-2037M
■Short KOK-2037S
For Radial master brake and clutch cylinders for foldable levers
■Standard KOK-2038L■Middle KOK-2038M
■Short KOK-2038S
CNC Dial Cuff for Brembo RCS
■Easy installation! Dial cuff machined from aluminum alloy!
■Exclusive to Brembo RCS master cylinder lever dials!
■For improved dial operation and one point accent!
KOK-2073##
※## (color code) is added to the end of the part number. See the color code table above. 
Please refer to the color code table here.
※When the dial cuff is used with an RCS Corsa Corta master cylinder, it is necessary to use the spring & adjuster knob for RCS master cylinders [110.A263.77] together.
※Mounting screw with a hex wrench
*Color tones are samples.
Bleeder Bolts for Brembo Calipers and Master Cylinders
■ New round head bolts providing closer contact!
■ Corrosion resistant stainless steel body!
■ Improved durability thanks to Titanium / Black-X coating!
■ Making your vehicle a racing look with one point accent!
KOK-1031TI / BK
KOK-1032TI / BK
KOK-1033TI / BK
Lever Pivot Pins for Brembo Master Cylinders
Normal steel pivots may cause sticking or play due to rust. This product is expected to have improved corrosion resistance due to the stainless steel, smooth operation due to improved durability and reduced frictional resistance due to the “titanium coat” and “black X coat” treatment. It is also a one-point customization that looks racing-like.
 |
|
|---|---|
 |
|
 |
|
Brake Remote Adjuster for Brembo
For RCS Corsa Corta/RCS brake master cylinders
KOK-2027PL / BK
KOK-2027PL / BK
*”PL” and “BK” at the end of the part number mean “polished” and “black” respectively.
- ■Deals with a change in lever position during circuit riding or sports riding.
- ■For RCS Corsa Corta and RCS master cylinders
- ■Black (BK) and polished (PL) are available for colors of the bracket.
Miller Clamp for Brembo RCS Corsa Corta Brake Master Cylinders
KOK-2076
■M10 P1.25 right-hand thread
■Color approximate to the RCS Corsa Corta color
